If you have routers connecting multiple networks, you should put in the IP address of the one on your subnet. The gateway field refers to a machine typically known as a If you're not by yourself, see your system administrator for some available addresses on your network. X.x subnet is specifically reserved by the Internic for LANs. If you don't have an IP address to use, and you are on a network by yourself, steal ours, as the 192.168. If you use DHCP on your network, select the "Obtain an IP Address from a DHCP server" button. For example, if the server's address is 192.168.236.86 and its network mask 255.255.255.0, you might use the address 192.168.236.10, if it is available, for the NT workstation, along with the same netmask. You or your network manager should have selected an address for the client on the same subnet (LAN) as the Samba server. Select the "Specify an IP address" radio button and enter the computer's address and subnet mask in the space provided for the proper adapter (Ethernet card).
Touche example windows#
Don't worry that Windows NT forces the computer name and the workgroup to be all capital letters it's smart enough to figure out what you mean when it connects to the network.įigure 3.22: Microsoft TCP/IP Properties for Windows NT You're allowed to make it different from the TCP/IP hostname, but doing so is usually not a good thing. The name you set here is the NetBIOS name. Pressing this button raises an Identification Changes dialog box, where you can reset the workgroup and the machine name, as shown inĪ word of warning: you will have to set the machine name again later while configuring TCP/IP, so be sure that the two names match. However, you cannot edit either name here (as you could in Windows 95/98), but instead must use the Change button below the two text fields. In this case, the workgroup name is SIMPLE. Here, you need to identify your machine with a name (we use the name Artish here) and change the default workgroup to the one you specified in the The first tab in this dialog box should be the Identification tab, as illustrated inįigure 3.16: Network panel Identification tab This will take you to the Network dialog box for the machine. From the Control Panel, double click on the Network icon. The first thing you need to do is to give the machine a NetBIOS name.
0 kommentar(er)
